TEN 6-2413WIN

DC/DC Converter TEN 6WIN Series, 6 Watt • • • Wide 4:1 input voltage range • Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) • • • • • Input filter meets EN 55022, class A High efficiency Operating temperature range –40°C to +85°C UL 62368-1 IEC 62368-1 The TEN 6WIN series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Overload protection DIP-24 plastic package Industry standard pinout 3-year product warranty Models Order Code Input Voltage Range TEN 6-2410WIN TEN 6-2411WIN TEN 6-2412WIN TEN 6-2413WIN TEN 6-2415WIN TEN 6-2421WIN TEN 6-2422WIN TEN 6-2423WIN TEN 6-4810WIN TEN 6-4811WIN TEN 6-4812WIN TEN 6-4813WIN TEN 6-4815WIN TEN 6-4821WIN TEN 6-4822WIN TEN 6-4823WIN 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA typ. 77 % 80 % 84 % 84 % 84 % 80 % 84 % 84 % 77 % 80 % 84 % 84 % 84 % 80 % 84 % 84 % Options Suffix -HI - Optional models with high isolation (3000 VDC) www.tracopower.com September 20, 2023 Page 1 / 4 TEN 6WIN Series, 6 Watt Input Specifications Input Current 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. 24 Vin models: 215 mA max. (3.3 Vout model) 300 mA max. (5 Vout model) 300 mA max. (12 Vout model) 300 mA max. (15 Vout model) 300 mA max. (24 Vout model) 260 mA max. (5 / -5 Vout model) 300 mA max. (12 / -12 Vout model) 300 mA max. (15 / -15 Vout model) 48 Vin models: 110 mA max. (3.3 Vout model) 150 mA max. (5 Vout model) 150 mA max. (12 Vout model) 150 mA max. (15 Vout model) 150 mA max. (24 Vout model) 130 mA max. (5 / -5 Vout model) 150 mA max. (12 / -12 Vout model) 150 mA max. (15 / -15 Vout model) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) 24 Vin models: 7 VDC min. / 8 VDC typ. / 9 VDC max. 48 Vin models: 14 VDC min. / 16 VDC typ. / 18 VDC max. 24 Vin models: 8.5 VDC max. 48 Vin models: 16 VDC max. 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. 24 Vin models: 1'500 mA (slow blow) 48 Vin models: 800 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type 3 W max. - At no load - At full load Surge Voltage Start-up Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Short Circuit Input Power Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output - dual output ±2% max. 0.5% max. 0.5% max. 1.2% max. 1.2% max. (Output 1) 1.2% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Short Circuit Protection Overload Protection 80 mVp-p max. 470 µF max. 470 µF max. 100 µF max. 100 µF max. 47 µF max. 100 / 100 µF max. 100 / 100 µF max. 100 / 100 µF max. Not required ±0.02 %/K max. Continuous, Automatic recovery Foldback Mode All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TEN 6WIN Series, 6 Watt Output Current Limitation Transient Response 110% min. of Iout max. 145% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 300 µs typ. / 600 µs max. (75% to 100% Load Step) - Response Deviation - Response Time Safety Specifications Safety Standards CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten6win PD 3 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions EN 55032 class A (internal filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/ten6win - Conducted Emissions - Radiated Emissions General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF 95% max. (non condensing) –40°C to +85°C +100°C max. –50°C to +125°C 2.5 %/K above 60°C (3.3 & 5.0 Vout models) 3.3 %/K above 70°C (other models) See application note: www.tracopower.com/overview/ten6win Natural convection (20 LFM) 6'000 m max. 290 - 370 kHz (PWM) 330 kHz typ. (PWM) Functional Insulation 1'500 VDC (Standard models) 3'000 VDC (suffix -HI) 1'800 VDC 1'000 MΩ min. 1'000 pF typ. 800'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2.5 µm min.) Gold (75 - 125 nm), glossy Plastic Case PCB Mount THD (Through-Hole Device) DIP24 Lead-Free Wave Soldering 260°C / 10 s max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TEN 6WIN Series, 6 Watt Weight 12.7 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 77b7bf46-53a4-4eaf-b810-bc9e8a874f69 Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten6win Outline Dimensions Pinout 9 11 Pin Bottom view 16 14 2.54 23 22 20.3 (0.80) 15.22 (0.599) 3 (0.100) 2 Single Dual 2 in (GND) in (GND) 3 in (GND) in (GND) 9 No pin 11 NC 14 +Vout 16 out 22 23 Common out +Vout Common +Vin (Vcc) +Vin (Vcc) +Vin (Vcc) +Vin (Vcc) NC: Not connected 10.2 (0.40) 31.8 (1.25) 4.1 2.54 15.24 (0.600) (0.100) 5.08 4.5 (0.200) (0.18) (0.16) Ø0.5 (Ø0.02) Dimensions in mm (inch) Tolerances x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerance: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4